Striking distance keywords

Striking distance keywords: find them and move them onto page one

Searches where you already rank 5 to 20 are the closest traffic you can win. How to pull them from Search Console, which ones to skip, and what to change.

Explore the live demo →

5 days free · no card needed · ends on its own

Updated

Striking distance keywords are searches where your page already ranks close to the top, usually position 5 to 20 in Google Search Console, so a modest improvement can put it where people actually click. To find them, export queries and pages from Search Console, keep the pairs with an average position between 5 and 20 and enough impressions to judge, then fix the title, the page and its internal links for the words people searched.

What “striking distance” means

The term covers keywords on page 2 (positions 11 to 20) and the lower half of page one (positions 5 to 10). Both get few clicks for the impressions they earn, because most clicks go to the first few results. Google has already judged the page relevant to the search, which is why moving it up a few places is usually easier than ranking a new page from nothing.

There is no official definition. Some guides use 11 to 20 only, some 4 to 15. The band matters less than the reason behind it, so here is the reasoning for 5 to 20:

DirectoryLens uses the same band: its Almost page one report lists searches where the impression-weighted average position rounds to 5 to 20. Its Bigger opportunities tab widens it to 3 to 30 for a longer list.

How to find striking distance keywords in Search Console

  1. Open Performance > Search results and pick the last 3 months, which gives enough impressions without mixing in old rankings. Turn on Average CTR and Average position.
  2. Get queries and pages together. The report shows one dimension at a time in its table, and both the table and the export stop at 1,000 rows. For more, use the Search Analytics API with the query and page dimensions (up to 50,000 rows per day per site per search type, per Google’s note on data limits), the Looker Studio connector, or the bulk export to BigQuery. On a small site, filtering the UI by one page at a time also works.
  3. Filter to an average position of 5 to 20. In a spreadsheet, round the position first, so 4.6 counts as 5 and 20.4 as 20.
  4. Set a minimum number of impressions. DirectoryLens defaults to 20 impressions for a query and page pair over the dates you pick, and lets you go from 5 to 100. Below about 20 you can’t tell a low click rate from bad luck, and you will spend time on searches almost nobody makes. On a big site, raise it.
  5. Remove brand searches and site: queries. Brand searches behave differently; see branded vs non-branded keywords.
  6. Sort by what is at stake. Impressions times the click rate you would get at a better position, minus the clicks you already get. Use your own click rate at position 3, not an industry number; here is how to build it.
Example. /plumbers/austin-tx ranks 9.3 for “emergency plumber austin” with 1,400 impressions and 14 clicks in 3 months. If your pages at position 3 usually get 9% of clicks, the same impressions at position 3 would bring about 126 clicks, so up to 112 more. That is an upper limit, not a forecast, but it tells you this page is worth the work and a search with 60 impressions isn’t.

Average position: the caveats that change the list

More on reading positions: keyword rankings in Search Console.

How to move them onto page one

1. Check the title and H1 use the words people searched

Compare each query’s words with the page’s title, meta description and H1. Count singular and plural as the same word, and a state code as its name (“tx” and “Texas”). If a word that shows up in many of the page’s impressions is missing from the title, add it, once and naturally. Leave out quality words like “best” or “cheap” and contact words like “phone”: they don’t make a page more relevant.

Don’t add a word for every search. DirectoryLens only suggests a title word when it accounts for at least 30% of the page’s striking-distance impressions, and never more than two. If the page is built from a template, change the template, not one page.

2. Check the page answers the search

A page at position 12 for “emergency plumber austin” that never mentions emergency or after-hours service is unlikely to climb on a title change alone. Add what the search asks for, if it is true: which listed plumbers offer 24-hour service, a filter for it, a short section on what to expect. If the page can’t honestly answer it, another page may be the better target.

3. Link to it from pages that already rank

Internal links tell Google which pages you think matter. Add links from pages that already get impressions and clicks, with anchor text that uses the searched words: from the Austin city hub to /plumbers/austin-tx, from nearby city pages, from a related guide. A page linked only from a paginated list or the sitemap is easy for Google to underrate.

4. Make sure the page can rank at all

Check that it is indexed, has the canonical you expect, and isn’t competing with another of your pages for the same search. Two of your URLs at 9 and 13 for one query often means neither will climb until you pick one; see the keyword cannibalization checker.

5. Measure it properly

Write down the date you changed each page. Wait until Google has recrawled it (URL Inspection shows the last crawl date), then compare at least two weeks after with the same number of days before. Rankings move for reasons that have nothing to do with you, so compare with similar pages you didn’t change. On a template, change half the pages and keep half as a control; see SEO A/B testing.

When to leave a striking distance keyword alone

On a directory

Striking distance keywords on a directory cluster by page type. Category-in-city pages (/plumbers/austin-tx) sit at 8 to 15 for “[service] [city]” searches; listing pages sit at 5 to 12 for “[business name] [service]” searches; city hubs pick up broad “[city] [category]” searches. Group the list by page type before you look at single URLs. If 300 city pages are all at 11 to 14 and their titles all lack the state, that is one template change.

Watch for parameter and paginated URLs in the list. If /plumbers/austin-tx?page=2 ranks 12 for a search the clean page should own, the fix is consolidation, covered in pagination and faceted navigation.

How DirectoryLens does it

Quick wins > Almost page one lists every search where a page ranks 5 to 20, has at least 20 impressions (you can pick 5, 10, 20, 50 or 100) and gets a lower click rate than your site usually gets at that position for that kind of search. It groups them by page type and by page, and estimates two numbers: visits at your usual click rate for the current position (counted only where the gap is at least 2 standard errors, so chance doesn’t inflate it), and visits at position 3.

Select a page and DirectoryLens fetches its live title, meta description and H1, lists the search words they leave out, and flags a noindex, a canonical pointing elsewhere, or a title over about 60 characters. The same data is available to Claude and ChatGPT through the Search Console MCP server.

Questions

What are striking distance keywords?

Searches where your page already ranks near the top, usually positions 5 to 20 in Search Console, so a modest improvement can move it to where most clicks happen.

How do I find keywords on page 2 of Google?

In Search Console’s Performance report, get queries and pages together (through the API or an export for more than 1,000 rows), keep pairs with an average position of 11 to 20 and enough impressions, and remove brand searches.

What position range counts as striking distance?

There is no official range. 5 to 20 works well: it includes the lower half of page one, which also gets few clicks, and stops before rankings that need a bigger project.

How many impressions does a striking distance keyword need?

Enough to judge its click rate. About 20 impressions for a query and page pair over the period is a sensible minimum; raise it on large sites so you focus on searches worth the work.

How long does it take to move a page 2 ranking?

Google has to recrawl the page before anything changes, which can take days or weeks. Compare at least two weeks after the change with the period before, and with similar pages you didn’t change.

Is Search Console average position accurate?

It is accurate for what it measures: the topmost position your site held, averaged across impressions. It mixes devices, places and days, so check the trend and filter by device and country before acting.

See your searches just off page one.

Connect Search Console and DirectoryLens lists every search ranking 5 to 20, by page type, with the words each title leaves out.

Explore the live demo →

5 days free · no card needed · ends on its own